PreWired Evil T-Bar - 14 Inch for 2011 & Newer Sportster and Softail models (Dyna, Street Bob, Low Rider/ S, Heritage, Deluxe, Slim & Fat Bob)

  • Sale
  • Regular price $399.99


All New Flat/Matte Black!

PreWired 12" Evil T Bars for 2011 & Newer Sportster and Softail models (Dyna, Street Bob, Low Rider/ S, Heritage, Deluxe, Slim & Fat Bob)

With the Harley-Davidson Sportster (2014-2021), Dyna (2012-2017) and Softail models (2011-2021 , Street Bob, Low Rider/ S, Heritage, Deluxe, Slim & Fat Bob) the ability to purchase “prewired” bars is typically expensive. The wiring for your stock switches is hardwired into your controls and doesn’t allow for the same solution that is available for the touring models.



We have designed a solution that is extremely simple and far less expensive. Allowing you to use our “Prewired” bars with your existing switches and turn signals.



Our bars come with the control and turn signal extensions Pre-Wired along with self-solder/heat shrink connectors.



You simply cut your control and turn signal wires, strip a small portion of each, place them into our pre-soldered/heat shrink connectors and shrink them.



We have done the hard work for you, leaving only the finishing touches up to you! Really it’s just that simple! In addition it’s much more cost effective! The cost of your control and turn signal extensions (and TBW if needed) is well over $100.



With our Prewired solution you get fully extended harnesses. No additional extensions necessary! Also you will not have to look at the bulky extension connections that typically show when installing harness extensions on your bike. Finally an all in one, prewired solution for your softail or sportster that won’t break the bank!

 

 

Total width 28 inches, pullback 2.5 inches

  • Limited Lifetime Warranty
  • Fits 1996-2020 model years of Harley-Davidson Dyna, Softail and Sportster
  • Available with 12 inch, 14 inch and 16 inch rise in Chrome or Gloss Black finish
  • Hand Made in the USA - Laser cut, fully TIG welded, beveled & de-burred for easy internal wire pulling, and polished to show quality finish
  • All of our bars are carefully designed to provide natural, relaxed grip angles combined with optimal pullback comfort. We have engineered them to be direct bolt-on replacements for stock equipment. No slag inside the bar tubes makes installation easy.

When we introduced our Evil-T Bars for the 1996-2020 Dyna, Softail, and Sportster our goal was to combine classic styling and unique attitude for Harley-Davidson owners that want the best quality with no compromises. Ride comfort and easy installation make choosing Dominator Industries handlebars to customize your bike a no-brainer.

 All of our parts are hand-made in the USA employing a multi-step manufacturing process using the finest materials. Tube diameter is 1.25” stepped down to 1” for stock/conventional controls. Both grips have 0.5” x 2” slots laser cut for internal wiring. The throttle side is honed out and notched for fly by wire but also fits cable throttle systems. Laser cut tubing yields the smoothest corners with no slag for easy wiring. The Knurled Center for non-slip grip on our handlebars is engineered to be a direct custom replacement for stock equipment.

We offer our Evil-T Bars with 12 inch, 14 inch, 16 inch rise in Chrome or Gloss Black finish.

Fitment includes: 1996-2020 Dyna, Softail, Sportster

 


Liquid error (layout/theme line 189): Could not find asset snippets/sb-car.liquid